While I can't say that I did not buy fabric for this quilt, I can say that I used a lot of what I have on hand & did a cracking good raid in my scrap bin! (Also I am fairly confident that I will be able to use the fabrics that I purchased in many other quilts. AKA I didn't just buy novelty prints.)
I also want to state that I was inspired by: Bars: A Modern take on an English Strippy Quilt made by Rachel at 2nd Avenue Studio.
I was also sort of inspired by Eleanor Burns, I purchased enough of her rulers & watched her make the units enough times on her tv shows & webinars.
So I started from the point of "what fabric do I have?" I have a lot of 5 inch squares. I went from there to, "can I make them using the 5 inch square? (without having to trim them down first?)" Yes. YAY - ok now what size for the background? Roughly 7.5 inches square. O.K. I'll make mine roughly 8.5 inches square so that I can make some wonky, askew, irregular, imperfect. (& some perfect too - because I can.)
From there the great fabric collecting/cutting extravaganza started.
As I just said, I have (had - ok have) a lot of 5 inch squares, so I started there pulling mediums & darks (trying to avoid prints that included white - goal = high contrast.)
I could sort & cut without feeling guilty about not working on my commissioned quilt. (I had to wait for the embroidery to be completed & for the specialty fabric to arrive. ahem, I'm going with that excuse.)
I had previously un-paired warm/cool squares - after finishing the previous half square triangle quilt, I was no longer inclined to make the warm/cool one. Too bad many of them were lighter that I wanted in this quilt. But that also helped me make this far more scrappy than warm & cool with lights.
At this time I also pulled lights & started to cut 8.5 x ? pieces (If they are bigger on purpose, then I don't have to trim them to the exact size... Also some rectangles might emphasize the imperfection aspect better.)
I quit counting how many light squares there were after 250 - sounded like a reasonable number of pieces... But then I found some more prints & I had completely forgotten about my light solids (I added quite a few solids - to help emphasize the "light" knowing that some of the other lights could read medium.) When I added the solids, I added some prints with white - the solid would make them look medium.
& I purchased some lights - why not... (Don't Answer that.) If 250 is good than 400-ish has to be better, right? (& I pretty much only make big quilts, so why not "plan" for king size?)
I still don't know how many there are.
Onto pining lights to mediums/darks.
then drawing lines, then sewing on both sides of the lines, then cutting them apart.
Now to press & pin back together, then drawing more lines, then cutting on the lines again.
Like this one with a rectangular background.
The full stack of the units sewn waiting for the cut.
(I guess 18 inches to 2 feet high.)
After the cut:
At this point, I realized that the units are smaller that I thought they were going to be. No I did not go from can I use a 5 inch square to "What size with the unit be?" I bought "all" of the rulers, so I wasn't starting from I have this ruler that makes this size so my fabrics need to be this size.
Needless to say I was shocked to find that they end up 1.5x3. But you get 4 of them...
Here they are:
& Here they are:
Did anyone guess that I was talking about flying geese?